Call us today at:
0161 368 2455
Pulleys
NK Technics have most standard pulleys on stock. We can customize..… manufacture according to drawings.
Because we have our own production facility it is possible to provide pulleys with a bore, a keyway or lower chambersall with short lead times.
Veel gebruikte materialen zijn:
Aluminium | Staal | RVS | POM
| Stock pulleys type | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| T2,5 | T5 | T10 | AT3 | AT5 | AT10 | XL | L | H | 5M | 8M | 14M |
|
For timing belt width | |||||||||||
| 6 mm | 10 mm | 16 mm | 6 mm | 10 mm | 16 mm | 037 | 050 | 100 | 9 mm | 20 mm | 40 mm |
| 10 mm | 16 mm | 25 mm | 10 mm | 16 mm | 25 mm | 075 | 150 | 15 mm | 30 mm | 55 mm | |
| 25 mm | 32 mm | 16 mm | 25 mm | 32 mm | 100 | 200 | 25 mm | 50 mm | 85 mm | ||
| 50 mm | 32 mm | 32 mm | 300 | 85 mm | 115 mm | ||||||
|
NK Technics have most standard pulleys on stock. We can customize..… manufacture according to drawings.
Standard sprockets We have most standard sprockets in stock. Because we have our own production facility it is possible to provide pulleys with a bore, a keyway or lower chambersall with short lead times. |
|||||||
|
For specialist devices and engineering we produce sprockets according to your drawing. We can offer small and large production runs at competitive prices. With larger numbers, there is hardly an additional cost for the special operations |
|||||||
There are no products in this category.
Product groups
